M1 - Automation Bridge Voice control Gateway
The M1 automationbridge helps bring different home automation and smart home systems together. Technologies that would not normally talk to each other natively, can now communicate harmoniously.
Connect the M1 Automationbridge hardware (a small, low-powered device) to your home router or network switch via the included ethernet cable and via the LAN it can scan the Network the Ness M1 (M1XEP required - Sold Seperatly)) and installation completed.
Once connected, you will be able to securely access the clean, easy to use interface via your local web browser. Setup and unification of your M1 to Smart Home Voice Devices is then as simple as “point and click” – no complicated coding – you will be up and running in minutes.
"Hey Siri, turn on the bedroom light".
Include your Ness M1 devices and scenes with Apple HomeKit.
"Hey Google, Open the living room curtains".
Include your Ness M1 devices and scenes with Google Home.
Don't raise a finger... just ask and I will perform...
|Ness M1 Tasks Control||Y||Y||Y|
|Ness M1 Light Control||Y||Y||Y|
|Ness M1 Output Control||Y||Y||Y|