WCP4A-W000SG

KAC Break Glass IP67 Rated - WHITE
with Inlet Gland, Double Pole
SUO633/SUO638


  • IP67
  • Double Pole Double Throw
  • White Only
  • The only choice for an IP Rated break glass





Specifications
SPECIFICATIONS Product Overview

Installation efficiency, flexibility and full compliance with the latest standards are at the heart of the new WCP Outdoor Call Point range. The outdoor WCP is an IP67 sealed manual call point product. The enhanced environmental protection allows the unit to be installed in many external environments where water and dirt are likely to be present, making it a true waterproof and outdoor product. Installation time and ultimately cost, are of paramount importance to any fire or security installer. The WCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new WCP products utilize a special terminal block, where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the WCP. Simple, but effective with no re-termination required and no time wasted. In addition, all WCP products are supplied with three standard 20mm knock outs for cable entries, accommodating all types of surface wiring installations. Through new standards and legislation, both break glass and re-settable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability, the new WCP range can be configured as either a break glass or re-settable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.
All WCP Outdoor Call Point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going in to alarm. Full compliance with the latest standards is essential and the new WCP indoor call point range is fully approved to the latest EN54-11 standard. The WCP4A product version is supplied with a double pole changeover set of contacts. The product utilizes two terminal blocks and wiring to the relevant terminals on these terminal connector blocks provides either a normally open or normally closed operation.


Electrical Specification

Cable Termination: 0.5-2.5mm2
Maximium Voltage: 30VDC
Switch Rating: 2 Amps
Environmental Specification
Humidity: 0-95% non-condensing
Operating Temperature: -30C to +70C
Storage Temperature: -30C to +70C
Ingress Protection (IP) Rating: IP67
Mechanical Specification
Material: PC/ABS
Weight: 240g
Colour: Red, Ral 3001
Ordering
 
Manufacturer KAC
Breakglass Setting Resettable
Breakglass Usage External Use
Breakglass Type Breakglass Unit

Product Name
Product Description

Please verify reCAPTCHA.

Slava Yurthev Copyright