PERM-PM45-4G

The Permaconn solution provides a constant secure link between the supervised premises and the Central Station.

The PM45 4G is a versatile alarm communicator that reports on 4G, 3G and IP to the Central Station.

This communicator can interface with a range of alarm panels using Contact ID. Primary alarm path is IP, followed by 4G/3G in the event of a wired Ethernet failure. The communicator reports on 4G or 3G if there is no IP connected.

• Remote “over-the-air” alarm panel programming using 4G/3G or IP path
• Dual SIM + IP alarm communicator
• Plug & Play solution
• Interfaces with any Contact ID alarm panel
• 3 input + 3 output, function control using Atlas and/or Pocket Secure
• Communicator automatically switches between 4G and 3G networks
• Low current draw, easily powered from alarm panel

• Small size – Fits inside alarm panel enclosure and suitable for ATM & M2M applications
• Secure VPN within Optus & Telstra networks – Dedicated for Permaconn events only
• AES128 encryption for alarm data – Secure transmissions over the public internet
• High speed RS232 Interface – Future development
• PM45-4G acquires an IP address automatically using the customers DHCP service – No IT headache
• Various diagnostic LEDs – Easy installation
• Activate, commission and diagnose using Atlas – Seamless installation process
• Three (3) dedicated paths of communication – Uptime in excess of 99.9%
• Internal watchdog reset function – No unnecessary service call-outs
• Monitors & reports dialler interface lead status – Panel dialler to Permaconn interface secure
• Compliant to AS2201.5:2008
• Outputs can be configured to arm/disarm alarm system, control gates and lights. ‘Pocket Secure’ smartphone app controls these functions.