K-6002

Format	Label	Description	Type	Size	Download
	Manual	Ness K-6002 Install Manual	pdf	618.7 KB	Download
	Brochure	Ness K-6002 Brochure	pdf	117.7 KB	Download
	Software/Firmware		zip	22	Download
	Software/Firmware	IP232 Install Program	exe	3 MB	Download

Name

Email

Mobile Number

Message

Type the number:

Submit

The IP232 is an Ethernet to RS-232 Serial Port Bridge.

It may be used to connect any standard serial communications device such as a PC, an audio/video distribution system, or an Ness-M1 Control or Ness D8X / D16X, to an Ethernet network.

It allows bi-directional communication between the two. It operates as a network server, which means it does not initiate network connections, but rather, accepts them.

The IP232 is required to connect the D8X / D16X to the Ness aComms and iComms Apps or the Ness M1 Touchscreen to the Russound Audio Distribution system.




Supports both UDP and TCP protocols



Allows up to twelve (12) simultaneous TCP-IP network connections



Up to twelve (12) "Rules" may be programmed to make outgoing connections.



Outgoing connections may be initiated upon power up or when serial activity is detected.



They may remain connected indefinitely or for a set time period.



Selectable baud rate from 300 to 115200 baud



Supports software handshaking (XON/XOFF) and hardware handshaking (RTS/CTS)



Multiple Bridges can be used on the same network



Can be updated in the field with new firmware using the Configuration Utility



Integrated 802.3 compliant 10/100 Mbit network interface



RS232, DB9M 9-pin serial port connection



Connects to the M1 RS-232 Serial port (Port 0).



RJ45 8-pin Network Jack



2.1mm barrel type power connector (center positive)



LED Indicators for Power, Link, and Data

1538